Amani, M., Tougas, I. M., Gregory, O. J., & Fralick, G. C. (2013). High temperature thermoelectric properties of znxinyox+1.5y solid solutions. Journal of Electronic Material, 42, 114-120.

Berka, S., & Groll, E. A. (2013). Bridging the languages with engineering: Editors’ introduction. Online Journal for Global Engineering Education, 6.

Besio W., Makeyev, O., Medvedev, A., & Gale, K. (2013). Effects of transcranial focal electrical stimulation via tripolar concentric ring electrodes on pentylenetetrazole-induced seizures in rats. Epilepsy Research, 105, 42-51.

Bradshaw, A.S., Morales-Velez, A.C. & Baxter, C. (2012). Evaluation of existing CPT correlations in silt. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 43, 1-10.

Cao, Y., & He, H. (2012). SSC: A classifier combination method based on signal strength. IEEE Transactions Neural Networks and Learning Systems, 23, 1100-1117.

Cao, Y., He, H., & Hong, M. (2012). Somke: kernel density estimation over data streams by sequences of self-organizing maps. IEEE Transactions Neural Networks and Learning Systems, 23, 1254-1268.

Cardoso, S., Chalivendra, V., Yang, S., & Shukla, A. (2012). Damage detection of rubber toughened nanocomposites in the fracture process zone using carbon nanotubes. Engineering Fracture Mechanics, 96, 380-391.

Carvell, J., Cheng, R., & Yang, Q. (2013). Induced magneto-electric coupling at ferroelectric/ferromagnetic interface. Journal of Applied Physics, 113.

Chen, H., Cogswell, J., Anagnostopoulous, C., & Faghri, M. (2012). A fluidic diode, valves, and a sequential-loading circuit fabricated on layered paper. Lab Chip, 12, 2909-2913.

Costa, R., & Kay, S. (2013). On the use of exponentially embedded families of probability density functions for model selection. IEEE Transactions on Signal Processing, 61, 62-67.

Croote, D., Godfrin, M. P., Bose, A., Tripathi, A., & Lee J. (2013). A platform for retaining native morphology at sub-second time scales in cryogenic transmission electron microscopy. Review of Scientific Instruments, 84.

Du, L., Zhang, F., Liu, M., & Huang, H. (2012). Toward design of an environment-aware adaptive locomotion-mode-recognition system. IEEE Transactions on Biomedical Engineering, 59

Feltane, A., Faye Boudreaux-Bartels, G., & Besio, W. (2013). Automatic seizure detection in rats using laplacian EEG and verification with human seizure signals. Annals of Biomedical Engineering, 41, 645-654.

Gauch, E., LeBlanc, J., & Shukla, A. (2012). Response of preloaded thin composite panels subjected to underwater explosive loading. Computers and Structures, 112-113, 342-353.

Grilli, A. R., Lado, T., & Spaulding, M. (2013). A protocol to include ecosystem services in a wind farm cost model. Journal of Environmental Engineering, 139, 176-186.

Grilli, S. T., Harris, J. C., Tajalibakhsh, T., Masterlark, T. L., Kyriakopoulos, C., Kirby, J. T., & Shi, F. (2013). Numerical simulation of the 2011 Tohoku tsunami based on a new transient fem co-seismic source: comparison to far- and near-field observations. Pure and Applied Geophysics, 170, 1333-1359.

Guerber, E., Benoit, M., Grilli, S. T., & Buvat C. (2012). A fully nonlinear implicit model for wave interactions with submerged structures in forced or free motion. Engineering Analysis with Boundary Elements, 36, 1151-1163.

Hensel, J., Sharma, M. S., Baxter, C., & Hu, J. (2012). Development of a technology type factor for jacket structures for offshore wind turbines in Rhode Island. Journal of Renewable and Sustainable Energy, 4.

Jang, A., & Bishop, P. L. (2012). Remediation potential of mulch for removing lead. Environmental Technology, 33, 623-630.

Janssen, C. F., Grilli, S. T., & Krafczyk, M. (2013). On enhanced non-linear free surface flow simulations with a hybrid LBM-VOF approach. Computers and Mathematics with Applications, 652, 211-229.

Jouaneh, M., Boulmetis, J., & Palm, W. (2013). Take-home experiments in engineering courses: evaluation methods and lessons learned. International Journal of Engineering Education, 29, 139-153.

Kasaraneni, V., Kohm, S., Ebere, D., Boving, T., & Oyanedel-Craver, V. (2013). Enhanced containment of polycyclic aromatic hydrocarbons through organic modification of soils. Environmental Progress and Sustainable Energy.

Katepalli, H., John, V. T., & Bose, A. (2013). The response of carbon black stabilized oil-in-water emulsions to the addition of surfactant solutions. Langmuir, 29, 6790-6797.

Kay, S. (2012). A new proof of the Neyman-Pearson theorem using the EEF and the vindication of Sir R. Fisher. IEEE Signal Processing Letters, 19, 451-454.

Kay, S., & Ding, Q. (2013). Model estimation and classification via model structure determination. IEEE Transactions on Signal Processing, 61, 2588-2597.

Kay, S., & Ding, Q. (2013). On the performance of independent processing of independent data sets for distributed detection. IEEE Signal Processing Letters, 20, 619-622.

Kay, S., & Vankayalapati, N. (2013). Improvement of TDOA position fixing using the likelihood curvature. IEEE Transactions on Signal Processing, 61, 1910-1914.

Kay, S., Ding, Q., & Rangaswamy,M. (2013). Sensor integration for distributed detection and classification. IEEE Transactions Aerospace and Electronic Systems, 49, 580-593.

Kirby, J. T., Shi, F., Tehranirad, B., Harris, J. C., & Grilli, S. T. (2013). Dispersive tsunami waves in the ocean: model equations and sensitivity to dispersion and Coriolis effects. Ocean Modeling, 62, 39-55.

Kumar, P., LeBlanc, J., & Shukla, A. (2012). Effect of plate curvature on blast response of aluminum panels. International Journal of Impact Engineering, 46, 74-85.

Kumar, P., Stargel, D., & Shukla, A. (2013). Effect of plate curvature on blast response of carbon composite panels. Composite Structures, 99, 19-30.

Kumaresan, R., Peddinti, V. K., & Cariani, P. (2013). Synchrony capture filterbank: auditory-inspired signal processing for tracking individual frequency components in speech. The Journal  of the Acoustical Society of America, 133, 4290-4310.

Kurniawan, Y., Piernavienja, M., Venkataramanan, K. P., Scholz, C., Bothun, G. D. (2012). Role of ionic strength in modulating n-Butanol partitioning into anionic phosphatidylcholine/phosphatidylglycerol vesicles. The Journal of Physical Chemistry B, 117, 8484-8489.

Lee, W. H., Choi, W. H., Guo, X., Heineman, W. R., & Bishop, P. L. (2012). Carbon-fiber nitrite microsensor for in situ biofilm monitoring. Key Engineering Materials, 521, 113-139.

Li, H., Sun, H., Wen, J., Cheng, S., & He, H. (2012). A fully decentralized multi-agent system for intelligent restoration of power distribution network incorporating distributed generations. IEEE Computational Intelligence Magazine, 7, 66-76.

Liu, Y., Sun, Y., Liu, S., & Kot, A. (2013). Securing online reputation systems through trust modeling and temporal analysis. IEEE Transactions on Information Forensics and Security, 8, 936-948.

Lucia, A., & Henley, H. (2013). Thermodynamic consistency of the multi-scale Gibbs-Helmholtz constrained equation of state. Chemical Engineering Research and Design, 91, 1748-1759.

Maciejewski, K. &  Ghonem, H. (2013). Influence of continuum precipitates on intergranular fatigue crack growth of a P/M nickel-based superalloy. Materials Science & Engineering, 560, 439-449.

Makeyev, O., Liu, X., Luna-Munguía, H., Rogel-Salazar, G., Mucio-Ramirez, S., Liu, Y., Sun, Y., Kay, S., & Besio, W. (2012). Toward a noninvasive automatic seizure control system in rats with transcranial focal stimulations via tripolar concentric ring electrodes. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 20, 422-431.

Morra, G., Geller, R., Grilli, S. T., Karato, S.-I., King, S., Lee, S., Tackley, P., & Yuen, D. (2013). Growing understanding of subduction dynamics indicates need to rethink seismic hazards. Eos, Transactions American Geophysical Union, 94, 125-126.

Ni, Z., He, H., & Wen, J. (2013). Adaptive learning in tracking control based on the dual critic network design. IEEE Transactions Neural Networks and Learning Systems, 24, 913-928.

Nie, M., Abraham, D. P., Chen, Y., Bose, A., & Lucht, B. L. (2013). Silicon solid electrolyte interphase (SEI) of lithium ion battery characterized by microscopy and spectroscopy. Journal of Physical Chemistry, 117, 13403–13412.

Nie, M., Chalasani, D., Abraham, D., Chen, Y., Bose, A., &  Lucht, B. L. (2013). Lithium ion battery graphite solid electrolyte interphase revealed by microscopy and spectroscopy. Journal of Physical Chemistry, 117, 1257-1267.

Nimmala, S. B., Yim, S. C., & Grilli, S. T. (2013). An efficient parallelized 3-D FNPF numerical wave tank for large-scale wave basin experiment simulation. Journal of Offshore Mechanics and Arctic Engineering, 135.

Nouguier, F., Grilli, S. T., & Guérin, C. (2013). Nonlinear ocean wave reconstruction algorithms based on spatiotemporal data acquired by a flash lidar camera. IEEE Transactions on Geoscience and Remote Sensing.

Raman, V., Bose, A., Hatton T. A., & Olsen B.D. (2012). Long range ordering of symmetric block-copolymer domains by chaining of superparamagnetic nanoparticles in external magnetic fields. Macromolecules, 54, 9373–9382.

Rayner, J., Zhang, H., Schubert, J., Lennon, P., Lantagne, & Oyanedel-Craver, V. (2013). Laboratory investigation into the effect of silver application on the bacterial removal efficacy of filter material for use on locally produced ceramic water filters for household drinking water treatment. ACS Sustainable Chemistry and Engineering, 1, 737-745.

Rogel-Salazar, G., Luna-Munguia H., Stevens, K. E., & Besio, W. (2013). Transcranial focal electrical stimulation via tripolar concentric ring electrodes does not modify the short- and long-term memory formation in rats evaluated in the novel object recognition test. Epilepsy & Behavior, 27, 154-158.

Saha, A., Lee, J., Pancera, S. M., Bräeu, M. F., Kempter, A., Tripathi, A., & Bose, A. (2012). New insights into the transformation of calcium sulfate hemihydrate to gypsum using time-resolved cryogenic transmission electron microscopy. Langmuir, 28, 11182–11187.

Saha, M., Nikova, A., Venkataraman, P., John, V. T., & Bose, A. (2013). Oil emulsification by surface-tunable carbon black particles. ACS Applied Materials and Interfaces, 5, 3094-3100.

Sarode, A., Wang, P., Cote, C., & Worthen, D. R. (2013). Low-viscosity hydroxypropylcellulose (hpc) grades SL and SSL: versatile pharmaceutical polymers for dissolution enhancement, controlled release, and pharmaceutical processing. AAPS PharmSciTech, 14, 151-159.

Tang, Y., He, H., Ni, Z., Wen, J., & Sui, X. (2013). Reactive power control of grid-connected wind farm based on adaptive dynamic programming. Neurocomputing.

Tang, Y., Ju, P., He, H., C. Qin, & Feng, W. (2013). Optimized control of DFIG-based wind generation using sensitivity analysis and particle swarm optimization. IEEE Transactions on Smart Grid, 4, 509-520.

Vadlamani, V., Chalivendra, V., Yang, S., & Shukla, A. (2012). Sensing of damage in carbon nanotubes and carbon black reinforced epoxy composites under tensile loading. Polymer Composites, 33, 1809-1815.

Venkataraman, P., Tang, J., Frenkel, E., McPherson, G. L., He, J., Raghavan, S. R., Kolesnichenko, V., Bose, A., & John, V. T (2013). Attachment of a hydrophobically modified biopolymer at the oil–water interface in the treatment of oil spills. ACS Applied Materials and Interfaces, 5, 3572-3580.

Wang, E., Gardner, N., Gupta, S., & Shukla, A. (2012). Fluid-structure interaction and its effect on the performance of composite structures under air-blast loading. International Journal of Multi-physics, 6, 219-240.

Xu, X., Hou, Z., Lian, C., & He, H. (2013). Online learning control using adaptive critic designs with sparse kernel machines. IEEE Transactions Neural Networks and Learning Systems, 24, 762-775.

Yamada, H., Hamian, S., Sunden, B., Park, K., & Faghri, M. (2013). Diffusive ballistic heat transport in thin films using energy conserving dissipative particle dynamics. International Journal of Heat and Mass Transfer, 61, 287-292.

Yan, J., Zhu, Y., He, H., & Sun, Y. (2013). Multi-contingency cascading analysis of smart grid based on self-organizing map. IEEE Transactions Information Forensics and Security, 8, 646-656.

Zhang, F. & Huang, H. (2013). Source selection for real-time user intent recognition toward volitional control of artificial legs. IEEE Journal of Biomedical and Health Informatics, 17, 907-914.

Zhang, H., & Oyanedel-Craver, V. (2013). Comparison of the bacterial removal performance of silver nanoparticles and a polymer based quaternary amine functionalized silsesquioxane coated point-of-use ceramic water filters. Journal of Hazardous Materials, 260, 272-277.

Return to the Annual Report Table of Contents.